The housingcan bear pressure 3.2Mpa for 96 hours, and the maximum burst pressure is 10.5Mpa.
precise screw thread makes installation easier, and parallel connection of the housing can save installtion and maintenance space .
the flow rate below is the treatment capacity of compressed air under rated working pressure 7barg(100psi g). for the application in other working pressure, please refer to the correction factor.
The benefits of installing our products are obvious
It is very important to change the filter elemnt often and choose original accessories
please replace the filter elements with AL SUBUK original products to ensure purified, dry and stable air. the element is constantly impacted by oil, acidic condensate and high velocity dust particulates during the whole operation process, it also has to filter and keep protecting your compressed air system, it will weaken the filter media and reduce the filtering performance if it passed the replacement period. Technically, these hidden and pressure indicating instruments. to replace the filter element erey year is very essential failed to replace the in time will lead to low product performance and air quality, as well as hight production cost.
|MODEL||PIPE SIZE||FLOW RATES(L/S)||FLOW RATES(m2/min||FLOW RATES(scfm)||WIDTH||DEPTH||HEIGHT||A||B||C(CLEARANCE FOR HOUSING)|
|PRESSURE Barg||PRESSURE Psig||CORRECTION FACTOR|
|As a primary filter, particles whose diameter more than 5µm can be removed, the maximum residual oil content is negligiible||Hight efficiency general protection, dust particles, water mist and oil mist whose diameter more than 1µm can be removed, the residual content of oil mist does not exceed 0.6 mg/m3(21°C),1ppm(w)||Hight efficiency |
oil removal filtration, dust , particles water mist whose diameter more than 0.01µm can be removed, the residual content of oil mist does nit exceed 0.0 mg/m3(21°C),0.001ppm(w)
|Ultra-efficient filtration, dust particles, water mist and oil mist whose diameter more the 0.01µm can be removed, the residual content of oil mist does not exceed 0.001 mg/m3|
|dust particles whose diameter more than 0.01µm, oil vapor and odor can be removed ,the maximum residual cotent of oil vapor does not exceed 0.003mg/m3 (21°C)|
|Dust particles diameter more than 0.01µm can be removed.||Dust particles whose diameter more than 0.01µm can be removed.|
|ISO 12500 has made clear a general test and definition method for the compressed air filter manufacturers. the main performance parameters are the air inlet oil content and the particle size distribution of the solid particles.|
ISO 12500-1 specifies the test requirements for the filtration performance of oil aerosol in the coalescing filter.
IOS 12500-2 specifies the test requirements of adsorption filters for the removal performance of steam adsorption.
ISO 12500-3 specifies the requirements for the removal of particulate matter from solid pollutants.
|size of solid particles (ISO12500-3)||5µm||1µm||0.01µm||0.01µm||--||1µm||0.01µm|
|filtration perfarmance of solid particles (ISO12500-3)||--||99.999+%||99.999+%||99.999+%||99.999+%||99.999+%||99.999+%|
|filtration performance of oil (ISO12500-1)||50%||80+%||99.9+%||99.9+%||---||---||---|
|Residual oil content (ISO 12500-1)||5mg/m3||0.6mg/m3||<0.01mg/m3||<0.001mg/m3||<0.004mg/m3||---||----|
Please Fill The Form Our Team Will Contact You As Soon As Possible.