Compressed Air Contamination Is A Real Problem For The Industry:

In today’s modern production facilities, the use of compressed air is often pivotal to manufacturing processes. Irrespective of whether the compressed air comes into direct contact with the product or is used to automate a process, provide motive power, or even generate other gases on-site,

We Have A Cost-Effective Solution For Every Contaminant:

• • Corrosion within compressed air storage vessels and the air distribution system.
• • Blocked or damaged valves, cylinders, air motors, and air tools.
• • Damaged production equipment.
• • Premature and unplanned desiccant changes for adsorption dryers.
• • Product contamination.

In addition to problems associated with the compressed air system itself, allowing contaminants such as particulate, oil, and micro-organisms to exhaust from valves, cylinders, and air tools can lead to an unhealthy and unsafe working environment.

Compressed Air Contamination Will Ultimately Lead To:

Inefficient production processes, Spoiled, damaged, or reworked products, Reduced production efficiency, Increased manufacturing costs

The Primary Reason For Using  AL-Subuk Compressed Air Filter Is To Remove Contamination And Improve Air Quality:

We design Philosophy of Air Quality & Energy Efficiency has led to a product that provides:

• • Highest air quality
• • Lowest power consumption
• • Lowest operational differential pressure
• • Lowest CO2 emissions
• • Lowest total cost of ownership

Air Quality Claim:

 Most compressed air filter manufacturers claim that the delivered air from their filters complies with the quality classifications of ISO8573 part 1 when tested with the methods and equipment stated in ISO8573 parts 2-9

International Certifications And Standards:

•  • Air quality which meets or exceeds the requirements of ISO8573-1 (all revisions)
• • Performance tested in accordance with ISO12500 & ISO8573
• • Only filter range to offer a ONE YEAR air quality guarantee

Energy Efficiency:

Any restriction to airflow within a filter housing and element will reduce the system pressure. To generate compressed air, large amounts of electrical energy are consumed; therefore any pressure losses within the system can be directly converted into a cost for wasted energy. 

Higher The Pressure Loss, The Higher The Energy Cost:

When comparing the running cost of alternative filters, many will calculate the energy cost of the filter, using the differential pressure or DP values printed in the literature. As demonstrated, these figures are not always accurate. Additionally, literature values are only representative of the filter in an “as new” condition and do not take into consideration the initial and ongoing blockage characteristics of the filter. Although filters and elements may look the same, their blockage characteristics and operational costs are quite different In addition Kindly check the attached Energy loss Data (Compressed air Calculation.Pdf) This calculation is based upon a 132kW compressor operating for 8000 hours

AL-Subuk Filter Element Technology:

• • Low-pressure drop when compared to traditional wrapped filter elements
• • Drainage layer is suitable for use up to 120°C and is compatible with all compressor oils

Maintaining Air Quality:

Annual filter element changes are essential(coalescing, Rust, and dust removal filters) To maintain your guaranteed air quality, filter elements must be replaced every year with our offered filtration system. Throughout its’ life, the filter element is constantly under bombardment from oily, acidic condensate and high-velocity dirt particles, which it has to remove and retain to protect your compressed air system. Over time, this can weaken the filter media and reduce filtration performance. This potential but critical reduction infiltration performance cannot be detected by simple differential Pressure monitoring techniques. Annual filter element changes are therefore essential and failure to replace every year could result in reduced product performance, degrading air quality, and increased operational costs.

Annual Filter Element Changes Ensure:

• • Optimal performance is maintained,
• • Air quality continues to meets, International standards,
• • Protection of downstream equipment, Personnel, and processes,
• • Low operational costs,
• • Increased productivity and profitability

AL-Subuk is Simply Cost Effective and Energy Saving.