AM Series

Air compressor filters, also called air line filters, are used in condensed air lines as a way to stop liquids and solid contaminants from entering air compressors. They stop these contaminants from entering the equipment and causing damage.

Contact us

Differential Pressure Gauges

are the Simple Way to Check a Filter Status.It helps the user to determine when to replace the filter element. AL SUBUK in standard designs with higher temperature and increased corrosion resistance.

The Facilitates

The facilitates the element replacement by reducing service clearance, and the absence of tie-rod contributes in precious gain for the flow path through the end cap collar.

Cataphoretic Coating

Cataphoretic coating confers high quality surface finish as well as ensure long high protection against corrosion.

AM Series

Air compressor filters, also called air line filters, are used in condensed air lines as a way to stop liquids and solid contaminants from entering air compressors. They stop these contaminants from entering the equipment and causing damage.Do you need a filter for your air compressor? The short answer is yes. Air purification is essential for any air compressor for more reasons than one. Providing your pneumatic tools with clean air will extend their lifespan significantly as compared to if you don't use an air compressor filter.

Finding the right filter for your industrial air compressor can increase the efficiency of your unit and reduce energy costs.

The size of the particles to be filtered.

2. The flow rate and head loss.

3. Temperature.

4. The applicable standards.

5. Minimum and Maximum Pressure of Working.

6. Maximum and Minimum delta acceptable.

7. Connection Size of Point of Use.

 

AL SUBUK Micro Filber Glass Elements .

Fiberglass Filters. This filters consists of layered fiberglass fibers laid over each other.

Pleated Air Filters. A pleated or polyester filter is usually a significant step up from a fiberglass filter.

 

AL SUBUK PP. Filber Glass Elements .

Al Subuk  filters in pure Polypropylene PP are made of 3 pieces and suitable to house SX (DOE) standard cartridges. They are used to filter and treat water and aqueous solutions with non neural pH, solvents, and chemical products in general.

Al SUBUK PP Spun bonded filter cartridges are made up of 100% polypropylene fibers. The fibers have been carefully spun together to form a true gradient density from outer to inner surface. Filter cartridges are available with core & without core version

 

Working conditions and Technical Data

● Capacity:1.2~25 m³/min
Max. Working Pressure: 16 bar
Max.working temperature:80℃
Differential Pressure: 0.07 bar
Filter Element Service: 6000 - 8000 hours
Air Filter With Differential Pressure Indicator
Filter housing internal with anti-corrosion treatment.

 

1. Generous aerodynamic flow paths and edged ports for reducing pressure drops.

2. Differential pressure gauges are the Simple Way to Check a Filter Status.It helps the user to determine when to replace the filter element. AL SUBUK  in standard designs with higher temperature and increased corrosion resistance.

3. The facilitates the element replacement by reducing service clearance, and the absence of tie-rod contributes in precious gain for the flow path through the end cap collar.

4. Cataphoretic coating confers high quality surface finish as well as ensure long high protection against corrosion.

5. Filter elements are characterized by:
7. high-quality stainless steel cores ensure extreme strength
8. Endcaps made of synthetic material resistant up to 120 °C, ensuring absolutely corrosion free solution

6. Outer drainer made of Strong alloy material that make drainage more timely and durable.



Need a help?

Please Fill The Form Our Team Will Contact You As Soon As Possible.

Reach out now!

+922134320349

Start the collaboration with us while figuring out the best solution based on your needs.