ASW & SWS Series
Protects coalescing filters from bulk liquid contamination. • Helps provide air quality in accordance with ISO 8573-1:2001 the international standard for compressed air quality. Suitable for all compressed air applications, High liquid removal of 70% condensate causes an increase in efficiencies at all flow conditions. Suitable for all compressor types, including variable flow.
Contact us
Zero Pressure Loss.
Water separator has No pressure loses operational costs. And positively increases the compressed air system quality.
Increased Filters Efficiency
Water separator increased the efficiency/performance of Refrigeration dryer and Compressed air Line Filters,
No Running Lost
Water Separator has no running cost, it has only one-time investment and no wear & tear for up to next 10 years,
ASW & SWS Series
The problem in the compressed air system
There is a large amount of water in the compressed air system, which will corrode the pipeline, damage the valves permanently, air cylinders, and pneumatic tools and devices; reduce the efficiency of the after-cooler/heat exchanger.
installation benefits of compressed air system
AL Subuk high-efficiency cyclone water separator will remove 99% liquid water in compressed air, can protect the air dryers and filters, and improve their performance.
- Reduce the corrosion to pipeline and damage to valves, air cylinders, electronic components by water.
- Protect air filter from bulk liquid contamination
- Improve air quality.
- Protect the pre-filter of a refrigerated air dryer and adsorption air dryer.
- Remove liquids in all fluids efficiently.
- cut down the operational and maintenance cost.
ws series technical specification
| The flow rate below is the treatment capacity of compressed air under rated working pressure 7barg(100psi g ). for the application in other working pressure, please refer to the correction factors. |
|---|
ws series technical specification
| MODEL | PIPE SIZE | Flow rates L/S | Flow rates m3/min | Flow rates scfm | w(width) | d(depth) | h(height) | A | B | C(clearance for housing) |
|---|---|---|---|---|---|---|---|---|---|---|
| ASW 15 | RC1/2" | 40.0 | 2.4 | 84.5 | 89 | 79 | 228 | 40 | 186 | 118 |
| ASW 25 | RC3/4" | 60.0 | 3.6 | 127.1 | 89 | 79 | 228 | 40 | 186 | 118 |
| ASW 50 | RC1" | 75.0 | 4.5 | 158.9 | 89 | 79 | 263 | 40 | 220 | 158 |
| ASW 75 | RC1" | 125.0 | 7.5 | 264.8 | 120 | 110 | 335 | 55 | 276 | 195 |
| ASW 100 | RC1-1/2" | 166.7 | 10.0 | 353.1 | 120 | 110 | 335 | 55 | 276 | 195 |
| ASW 200 | RC2 | 300.1 | 180 | 635.6 | 164 | 151 | 564 | 64 | 566 | 480 |
| ASW 250 | RC2-1/2" | 416.8 | 25.0 | 882.8 | 164 | 151 | 664 | 64 | 566 | 480 |
| ASW 700 | RC2-1/2" | 700.0 | 42.0 | 1483.1 | 200 | 189 | 712 | 78 | 634 | 560 |
| ASW 800 | RC3" | 833.5 | 50.0 | 1765.6 | 200 | 189 | 712 | 78 | 634 | 560 |
| ASW 800F | DB80/DB100 | 833.5 | 50.0 | 1765.6 | 280 | 189 | 734/744 | 78 | 634 | 560 |
| ASW 1000F | DB100/DB125 | 1000.2 | 60.0 | 2118.7 | 280 | 189 | 780/795 | 78 | 634 | 560 |
| ASW 1200F | DN100-DN125 | 1166.7 | 70.0 | 2464.0 | 280 | 189 | 1058/1073 | 78 | 889 | 780 |
TECHNICAL REQUIRMENTS
| Maximum operating pressure: 16 barg Maximum operating temperature: 80°C Minimum operating temperature: 1.5°C |
|---|
Table Heading Here
| PRESSURE Barg | PRESSURE Psig | CORRECTION FACTOR |
|---|---|---|
| 1 | 15 | 0.38 |
| 2 | 26 | 0.53 |
| 3 | 44 | 0.65 |
| 4 | 59 | 0.76 |
| 5 | 73 | 0.85 |
| 6 | 87 | 0.93 |
| 7 | 100 | 1.00 |
| 8 | 116 | 1.07 |
| 9 | 131 | 1.13 |
| 10 | 145 | 1.19 |
| 11 | 160 | 1.23 |
| 12 | 174 | 1.31 |
| 13 | 189 | 1.36 |
| 14 | 203 | 1.41 |
| 15 | 219 | 1.46 |
| 16 | 232 | 1.51 |
FWS SERIES TECHNICAL SPECIFICATION
| The flow rate below is the treatment capacity of compressed air underrated working pressure 7barg(100psi g). For the application in other working pressure, please refer to the correction factors |
|---|
fws series technical specification
| MODEL | PIPE SIZE | FLOW RATES L/S | FLOW RATES m3/min | FLOW RATES scfm | W(WIDTH) | D(DEPTH) | H(HEIGHT) | A | B | C(clearance for housing) |
|---|---|---|---|---|---|---|---|---|---|---|
| SWS010 | RC1/2" | 40.0 | 2.4 | 84.5 | 96 | 79 | 233 | 29 | 198 | 118 |
| SWS020 | RC3/4" | 60.0 | 3.6 | 127.1 | 96 | 79 | 233 | 29 | 198 | 118 |
| SWS050 | RC1" | 75.0 | 4.5 | 158.9 | 96 | 79 | 268 | 29 | 233 | 153 |
| SWS060 | RC1" | 125.0 | 7.5 | 264.8 | 138 | 111 | 339 | 37 | 296 | 208 |
| SWS070 | RC1-1/2" | 166.7 | 10.0 | 353.1 | 138 | 111 | 339 | 37 | 296 | 208 |
| SWS100 | RC2" | 300.1 | 18.0 | 635.6 | 174 | 142 | 669 | 58 | 607 | 469 |
| SWS110 | RC2-1/2" | 416.8 | 25.0 | 882.8 | 174 | 142 | 669 | 58 | 607 | 469 |
| SWS140 | RC3" | 833.5 | 50.0 | 1765.6 | 220 | 184 | 726 | 74 | 649 | 514 |
| SWS140F | DN80/DN100 | 833.5 | 50.0 | 1765.6 | 300 | 184 | 746/761 | 74 | 649 | 514 |
| SWS150 | RC4" | 1000.2 | 60.0 | 2118.7 | 220 | 184 | 726 | 74 | 649 | 514 |
| SWS150F | DN100/DN125 | 1000.2 | 60.0 | 2118.7 | 300 | 184 | 761/776 | 74 | 649 | 514 |
| SWS170 | RC4" | 1166.7 | 70.0 | 2464.0 | 220 | 184 | 983 | 74 | 906 | 764 |
| SWS170F | DN100/DN125 | 1166.7 | 70.0 | 2464.0 | 300 | 184 | 1018/1033 | 74 | 906 | 764 |
TECHNICAL REQUIREMENTS
| Maximum operating pressure: 16 barg maximum operating temperature: 80°C minimum operating temperature:1.5°C |
|---|
fws series technical specifitation
| PRESSURE Barg | PRESSURE Pisg | CORRECTION FACTOR |
|---|---|---|
| 1 | 15 | 0.38 |
| 2 | 29 | 0.53 |
| 3 | 44 | 0.65 |
| 4 | 59 | 0.76 |
| 5 | 73 | 0.85 |
| 6 | 87 | 0.93 |
| 7 | 100 | 1.00 |
| 8 | 116 | 1.07 |
| 9 | 131 | 1.13 |
| 10 | 145 | 1.19 |
| 11 | 160 | 1.23 |
| 12 | 160 | 1.23 |
| 13 | 189 | 1.36 |
| 14 | 203 | 1.41 |
| 15 | 219 | 1.46 |
| 16 | 232 | 1.51 |
Need a help?
Please Fill The Form Our Team Will Contact You As Soon As Possible.